EFEgoFilemanualHome / Manuals / Amica DFM66C8EOiBDAdd product
INSTRUCTION PAGE 00042 OF 3,210,000

Amica
DFM66C8EOiBD

Confirm ventilation, power and water requirements before first use, then complete the manufacturer's initial cleaning procedure.

AGDDishwasherPolski · PLRevision 2026.1

Polski: Product names, model codes, official notices and manufacturer text remain in the authoritative source language. EgoFile interface labels are translated.

DATA PROVENANCE

What this page contains

Record type
Instrukcja producenta
Authority
Producent / oficjalne centrum wsparcia
Verification
Źródło skatalogowane
Evidence
Dokument lub strona wsparcia OEM
Last source check
1 sierpnia 2026
Indexing policy
Strona może być indeksowana
Important limitation

Zakres i wariant regionalny należy potwierdzić na tabliczce znamionowej.

Odnośnik do właściciela dokumentu
100%profile completeness
PRODUCT WORKSPACE

One product. Everything in one place.

Manufacturer manual. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.

Exact brand and modelProduct categoryMarket and languageNamed sourceManufacturer documentation
01Confirm the variant

Compare the complete model, regional suffix and label.

02Save and monitor

Keep warranty, history and safety alerts together.

03Get a safe answer

Use cited guidance or create a private EgoFile case.

Add to My devicesAsk about this product →
01
Quick start

Before first use

  1. Remove packaging, films and transport parts.
  2. Place or install the appliance with the required clearances.
  3. Complete the first-use rinse, heat or calibration cycle.
02
Daily use

Use the product correctly

  1. Use cookware, accessories and consumables approved for the appliance.
  2. Select the programme or temperature before starting.
  3. Allow hot surfaces and steam to dissipate before unloading.
03
Safety

Important precautions

  • Do not block ventilation openings.
  • Disconnect power and water before maintenance.
  • Use heat protection when handling hot trays, vessels or steam.
04
Maintenance

Keep it working reliably

  • Wipe food residue after the appliance cools.
  • Clean filters, seals and removable accessories regularly.
  • Descale water systems at the interval shown by the appliance.
COMMON ERRORS & SYMPTOMS

What the product may be telling you

These are category-level diagnostic paths. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.

Source policySafe checks are maintained by EgoFile and linked to the official source record. No third-party manual text is copied.
01START

Programme will not start

Low priority

What it means: The door latch, water supply, control lock or delay timer may prevent operation.

Safe first check: Close the door, open the tap and cancel control lock or delay start.

Stop condition: Request service if the latch does not hold.

02FILL

No water enters

Medium priority

What it means: The inlet hose, tap or inlet filter may be restricted.

Safe first check: Inspect the visible hose and confirm the water tap is fully open.

Stop condition: Stop if the inlet hose or safety valve is damaged.

03DRAIN

Water remains after the cycle

Medium priority

What it means: Filters, the drain hose or sink connection may be blocked.

Safe first check: Clean removable filters and check the accessible drain connection.

Stop condition: Request service if the pump runs continuously or water returns.

04RESULT

Dishes remain dirty or wet

Low priority

What it means: Loading, spray-arm movement, programme choice or consumables may be unsuitable.

Safe first check: Reload without blocking spray arms and verify salt, rinse aid and detergent settings.

Stop condition: Request service if water is not heating.

05LEAK

Leak protection is active

High priority

What it means: Water may have reached the base or an inlet component may have failed.

Safe first check: Switch off, close the tap and leave the appliance level.

Stop condition: Do not tilt or restart the appliance; arrange qualified service.

QUICK CHECKS

Three more things to verify

Useful when no error code is visible.

No power

Check the socket, breaker and control lock.

Poor result

Verify loading, programme, consumables and cleaning status.

Unusual noise

Stop the appliance and check for loose accessories or foreign objects.

PUBLIC SAFETY CHECK

Check recalls separately from the manual.

No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.

Search safety notices →
Exact variant check

This EgoFile page is a practical quick reference, not a replacement for the complete manufacturer document. Confirm the full model, configuration and regional suffix before installation, operation, repair or safety-critical work.

Manufacturer support →
← Previous recordAll records: 3,210,000Next record →