Compare the complete model, regional suffix and label.
ASUS
Zenbook 14 OLED UX3405
Connect power, complete account and network setup, install updates and create recovery and backup options before regular use.
English: Product names, model codes, official notices and manufacturer text remain in the language of the authoritative source. EgoFile interface content is translated.
What this page contains
- Record type
- Manufacturer manual
- Responsible source
- Manufacturer / official support centre
- Verification
- Catalogued source
- Source evidence
- OEM document or official support page
- Last source check
- 1 August 2026
- Indexing policy
- Page is eligible for indexing
Confirm the document scope and regional variant against the rating label.
Link to the document ownerOne product. Everything in one place.
Manufacturer manual. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.
Keep warranty, history and safety alerts together.
Use cited guidance or create a private EgoFile case.
Before first use
- Connect the supplied power adapter and peripherals.
- Complete region, network, account and privacy settings.
- Install firmware, operating-system and driver updates.
Operate the product correctly
- Keep security updates enabled.
- Use supported cables, chargers and accessories.
- Back up important data to a separate location.
Important precautions
- Keep ventilation openings clear.
- Disconnect power before adding internal components.
- Stop using swollen batteries or damaged adapters.
Maintain reliable operation
- Clean vents and displays with suitable dry tools.
- Review storage, backups and security status.
- Check firmware and driver updates periodically.
What the product may be indicating
These are general diagnostic paths for this product category. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.
Computer does not power on
Medium priorityWhat it means: The adapter, battery, dock or power state may be responsible.
First safe check: Disconnect accessories, verify the approved adapter and perform the documented power reset.
Stop condition: Stop using a swollen battery, damaged port or sparking adapter.
System does not start correctly
Medium priorityWhat it means: An update, storage problem or connected peripheral may interrupt startup.
First safe check: Disconnect optional devices and use the official recovery or diagnostic environment.
Stop condition: Protect data before reinstalling or resetting the operating system.
No image or external display
Low priorityWhat it means: Brightness, display mode, cable or graphics state may be incorrect.
First safe check: Try the display shortcut, reconnect the cable and test the built-in screen or another approved cable.
Stop condition: Request service for impact damage, smoke or electrical smell.
Overheating or unexpected shutdown
High priorityWhat it means: Blocked ventilation, heavy load or cooling failure may raise temperature.
First safe check: Shut down, clear external vents and use the computer on a hard surface.
Stop condition: Seek service if the fan does not run or shutdowns repeat.
Three additional checks
Use these checks when no error code is displayed.
Will not power on
Check the outlet, adapter, battery and power reset procedure.
No network
Restart the adapter and router, then update drivers.
System is slow
Check storage space, updates and startup applications.
Check recalls separately from the manual.
No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.
Search safety notices →This EgoFile page is a practical quick reference, not a replacement for the complete manufacturer document. Confirm the full model, configuration and regional suffix before installation, operation, repair or safety-critical work.
Manufacturer support →