EFEgoFilemanualHome / Manuals / Bosch BGL8HYG1Add product
INSTRUCTION PAGE 00005 OF 3,210,000

Bosch
BGL8HYG1

Assemble the product, fit the correct cleaning accessory and verify that filters, tanks and safety latches are seated.

Home equipmentVacuum cleanerEnglish · EURevision 2026.1

English: Product names, model codes, official notices and manufacturer text remain in the authoritative source language. EgoFile interface labels are translated.

DATA PROVENANCE

What this page contains

Record type
Instrukcja producenta
Authority
Producent / oficjalne centrum wsparcia
Verification
Źródło skatalogowane
Evidence
Dokument lub strona wsparcia OEM
Last source check
1 sierpnia 2026
Indexing policy
Strona może być indeksowana
Important limitation

Zakres i wariant regionalny należy potwierdzić na tabliczce znamionowej.

Odnośnik do właściciela dokumentu
100%profile completeness
PRODUCT WORKSPACE

One product. Everything in one place.

Manufacturer manual. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.

Exact brand and modelProduct categoryMarket and languageNamed sourceManufacturer documentation
01Confirm the variant

Compare the complete model, regional suffix and label.

02Save and monitor

Keep warranty, history and safety alerts together.

03Get a safe answer

Use cited guidance or create a private EgoFile case.

Add to My devicesAsk about this product →
01
Quick start

Before first use

  1. Install the handle, hose, battery or cleaning head.
  2. Fit clean filters and fill only approved tanks.
  3. Test the controls on a small suitable surface.
02
Daily use

Use the product correctly

  1. Choose the accessory and power level for the surface.
  2. Keep airflow paths and rollers free of obstructions.
  3. Empty dirt or wastewater before the maximum mark.
03
Safety

Important precautions

  • Disconnect power before clearing blockages.
  • Do not collect hot ash, flammable liquid or sharp debris unless approved.
  • Keep water away from non-wet-rated electrical parts.
04
Maintenance

Keep it working reliably

  • Empty containers and rinse washable parts after use.
  • Remove hair and fibres from rollers.
  • Dry filters completely before refitting.
COMMON ERRORS & SYMPTOMS

What the product may be telling you

These are category-level diagnostic paths. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.

Source policySafe checks are maintained by EgoFile and linked to the official source record. No third-party manual text is copied.
01AIRFLOW

Low suction or airflow

Low priority

What it means: The bin, filter, tube or floor head may be obstructed.

Safe first check: Disconnect power, empty the bin and inspect accessible airflow paths.

Stop condition: Stop if the motor becomes unusually hot or smells burnt.

02BRUSH

Brush or roller has stopped

Medium priority

What it means: Hair, fibres or an overload protection may stop the drive.

Safe first check: Power off and remove wrapped debris using the approved access points.

Stop condition: Do not run the tool with a damaged roller or exposed wiring.

03FILTER

Filter warning remains on

Low priority

What it means: A filter may be dirty, wet, incorrectly installed or due for replacement.

Safe first check: Clean or replace it as specified and refit only when completely dry.

Stop condition: Replace a damaged filter before further use.

04POWER

Stops during use

Medium priority

What it means: Battery, thermal protection or blocked airflow may have interrupted operation.

Safe first check: Clear airflow, allow cooling and recharge with the approved charger.

Stop condition: Stop using a swollen battery or hot, damaged charger.

QUICK CHECKS

Three more things to verify

Useful when no error code is visible.

Low suction

Empty the bin and check filters, hose and floor head.

Brush stopped

Remove wrapped fibres after disconnecting power.

Will not charge

Clean contacts and check the dock, adapter and outlet.

PUBLIC SAFETY CHECK

Check recalls separately from the manual.

No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.

Search safety notices →
Exact variant check

This EgoFile page is a practical quick reference, not a replacement for the complete manufacturer document. Confirm the full model, configuration and regional suffix before installation, operation, repair or safety-critical work.

Manufacturer support →
← Previous recordAll records: 3,210,000Next record →