EFEgoFilemanualHome / Manuals / Manufacturer not specified Slow CookerAdd product
PUBLIC SAFETY RECORD 04688 OF 3,210,000

Manufacturer not specified
Slow Cooker

Confirm ventilation, power and water requirements before first use, then complete the manufacturer's initial cleaning procedure.

Consumer product safetySlow CookersEnglish · United StatesRecall date 2011-03-02

English: Product names, model codes, official notices and manufacturer text remain in the language of the authoritative source. EgoFile interface content is translated.

DATA PROVENANCE

What this page contains

Record type
Official safety notice
Responsible source
CPSC
Verification
Data from an official public register
Source evidence
Identifier: 615:11150
Last source check
2 August 2026
Indexing policy
Page is eligible for indexing
Important limitation

This record is not a user manual or confirmation of conformity for a specific variant.

Public data with attribution retained
100%profile completeness
PRODUCT WORKSPACE

One product. Everything in one place.

Official CPSC record. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.

Exact brand and modelProduct categoryMarket and languageNamed sourceOfficial identifier
01Confirm the variant

Compare the complete model, regional suffix and label.

02Save and monitor

Keep warranty, history and safety alerts together.

03Get a safe answer

Use cited guidance or create a private EgoFile case.

Add to My devicesAsk about this product →
01
Quick start

Before first use

  1. Remove packaging, films and transport parts.
  2. Place or install the appliance with the required clearances.
  3. Complete the first-use rinse, heat or calibration cycle.
02
Daily use

Operate the product correctly

  1. Use cookware, accessories and consumables approved for the appliance.
  2. Select the programme or temperature before starting.
  3. Allow hot surfaces and steam to dissipate before unloading.
03
Safety

Important precautions

  • Do not block ventilation openings.
  • Disconnect power and water before maintenance.
  • Use heat protection when handling hot trays, vessels or steam.
04
Maintenance

Maintain reliable operation

  • Wipe food residue after the appliance cools.
  • Clean filters, seals and removable accessories regularly.
  • Descale water systems at the interval shown by the appliance.
OFFICIAL SAFETY ACTION

Burlington Coat Factory Recalls Slow Cookers Due to Fire Hazard

Confirm the complete model, date code and product label before following the corrective measure.

2011-03-02 · 615:11150

Hazard: The slow cooker's control panel can overheat and melt, posing a fire hazard.

Official measure: Consumers should stop using the slow cooker immediately, unplug it and return the slow cooker to Burlington Coat Factory for a full refund or store credit.

Open official safety record ↗
COMMON ISSUES AND SYMPTOMS

What the product may be indicating

These are general diagnostic paths for this product category. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.

Source policySafe checks are maintained by EgoFile and linked to the official source record. No third-party manual text is copied.
01RECALL

Product matches a safety notice

High priority

What it means: The model, date code or product description may be subject to an official corrective action.

First safe check: Stop use and compare the complete identifying label with the official notice.

Stop condition: Follow only the official refund, repair, replacement or disposal remedy.

02DAMAGE

Visible damage or deformation

High priority

What it means: Cracks, loose joints, exposed wiring or distorted parts can defeat the intended safety design.

First safe check: Isolate the product and photograph the damage without dismantling it.

Stop condition: Do not reuse until the manufacturer confirms a safe remedy.

03PARTS

Part, guard or fastener is missing

Medium priority

What it means: The product may be incomplete, incorrectly assembled or affected by a component failure.

First safe check: Stop use and compare the assembly with the official parts and safety information.

Stop condition: Use only manufacturer-approved replacement parts and procedures.

04LABEL

Model or date code cannot be confirmed

Medium priority

What it means: A similar-looking product may not be covered by the same instructions or recall.

First safe check: Locate every rating label, serial number and date code before taking action.

Stop condition: Contact the manufacturer or CPSC when identification remains uncertain.

05INCIDENT

Fire, shock, injury or unexpected movement

High priority

What it means: A serious incident or near miss may indicate an immediate product hazard.

First safe check: Move people away, isolate energy only if safe and preserve the product for assessment.

Stop condition: Seek emergency help when needed and report the incident to the manufacturer and authority.

QUICK CHECKS

Three additional checks

Use these checks when no error code is displayed.

No power

Check the socket, breaker and control lock.

Poor result

Verify loading, programme, consumables and cleaning status.

Unusual noise

Stop the appliance and check for loose accessories or foreign objects.

PUBLIC SAFETY CHECK

Check recalls separately from the manual.

No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.

Search safety notices →
Exact variant check

This page summarizes an official safety record and corrective measure. Confirm the full model, date code and label before taking action.

Open official safety record →
← Safety productsAll records: 3,210,000Open official safety record →