Compare the complete model, regional suffix and label.
DeLonghi
La Specialista EC9355.M
Confirm ventilation, power and water requirements before first use, then complete the manufacturer's initial cleaning procedure.
English: Product names, model codes, official notices and manufacturer text remain in the authoritative source language. EgoFile interface labels are translated.
What this page contains
- Record type
- Instrukcja producenta
- Authority
- Producent / oficjalne centrum wsparcia
- Verification
- Źródło skatalogowane
- Evidence
- Dokument lub strona wsparcia OEM
- Last source check
- 1 sierpnia 2026
- Indexing policy
- Strona może być indeksowana
Zakres i wariant regionalny należy potwierdzić na tabliczce znamionowej.
Odnośnik do właściciela dokumentuOne product. Everything in one place.
Manufacturer manual. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.
Keep warranty, history and safety alerts together.
Use cited guidance or create a private EgoFile case.
Before first use
- Remove packaging, films and transport parts.
- Place or install the appliance with the required clearances.
- Complete the first-use rinse, heat or calibration cycle.
Use the product correctly
- Use cookware, accessories and consumables approved for the appliance.
- Select the programme or temperature before starting.
- Allow hot surfaces and steam to dissipate before unloading.
Important precautions
- Do not block ventilation openings.
- Disconnect power and water before maintenance.
- Use heat protection when handling hot trays, vessels or steam.
Keep it working reliably
- Wipe food residue after the appliance cools.
- Clean filters, seals and removable accessories regularly.
- Descale water systems at the interval shown by the appliance.
What the product may be telling you
These are category-level diagnostic paths. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.
No coffee or water flow
Low priorityWhat it means: The tank, filter, water circuit or spout may be empty or obstructed.
Safe first check: Refill and correctly seat the tank, then run the approved priming or hot-water cycle.
Stop condition: Stop if the pump remains loud with no flow.
Coffee is weak or dispenses slowly
Low priorityWhat it means: Grind, dose, beans or the brew unit may need adjustment or cleaning.
Safe first check: Use the recommended grind change one step at a time and clean removable parts.
Stop condition: Do not reach into the grinder.
Descaling required
Medium priorityWhat it means: The machine has reached its water-volume or time threshold.
Safe first check: Run the complete official descaling programme with an approved product.
Stop condition: Do not interrupt the process unless the official instructions say so.
Water collects under the machine
High priorityWhat it means: A tank, drip tray, seal or internal hose may be leaking.
Safe first check: Reseat and empty removable containers, then dry the surface and observe once.
Stop condition: Disconnect and request service if water returns underneath the housing.
Three more things to verify
Useful when no error code is visible.
No power
Check the socket, breaker and control lock.
Poor result
Verify loading, programme, consumables and cleaning status.
Unusual noise
Stop the appliance and check for loose accessories or foreign objects.
Check recalls separately from the manual.
No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.
Search safety notices →This EgoFile page is a practical quick reference, not a replacement for the complete manufacturer document. Confirm the full model, configuration and regional suffix before installation, operation, repair or safety-critical work.
Manufacturer support →