Compare the complete model, regional suffix and label.
Mortara Instrument, Inc
Unit Serial Number 113400177138 113400177139 114260218985 114260218986 114260218987 114360228306 114330225509 114330225510 114330225511 1143
Identify the exact product and model, inspect its condition and check the official safety notice before continued use.
English: Product names, model codes, official notices and manufacturer text remain in the language of the authoritative source. EgoFile interface content is translated.
What this page contains
- Record type
- Official safety notice
- Responsible source
- FDA
- Verification
- Data from an official public register
- Source evidence
- Identifier: 130724:Z-0110-2015
- Last source check
- 2 August 2026
- Indexing policy
- Page is eligible for indexing
This record is not a user manual or confirmation of conformity for a specific variant.
Public data with attribution retainedOne product. Everything in one place.
Official FDA record. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.
Keep warranty, history and safety alerts together.
Use cited guidance or create a private EgoFile case.
Before first use
- Match the model, date code and identifying label to the official record.
- Read the official recall notice and manufacturer instructions before assembly or use.
- Keep proof of purchase, serial details and recall contact information available.
Operate the product correctly
- Use the product only for its intended purpose and within stated age, load and environmental limits.
- Stop when a guard, fastener, restraint, cable or structural part is missing or damaged.
- Keep children and bystanders away from hazards described in the official notice.
Important precautions
- Stop using a recalled product until the official remedy has been completed.
- Do not improvise repairs, disable guards or substitute safety-critical parts.
- Report fire, shock, injury, collapse or unexpected movement to the manufacturer and appropriate authority.
Maintain reliable operation
- Inspect accessible fasteners, guards, cords, batteries and structural joints regularly.
- Use only approved replacement parts and cleaning methods.
- Recheck recall status after ownership transfer, repair or identification of a different model variant.
Monitor, Physiological, Patient(With Arrhythmia Detection Or Alarms) · Device Design
Confirm the complete model, date code and product label before following the corrective measure.
Hazard: Martara Instrument, Inc. has recently became aware of a potential safety hazard involving our Surveyor rand S12 S19 Patient Monitors. A hazardous situation may be created when mounting these monitors using the 75mm VESA mounting hole pattern provided in the battery cover of these monitors. If the mo
Official measure: Mortar Instruments, Inc. sent an "Urgent Medical Device Correction" letter dated October 3, 2014. The letter was addressed to Health Care Administrator / Risk Manger and Director of Biomedical / Clinical Engineering.The
Open official safety record ↗What the product may be indicating
These are general diagnostic paths for this product category. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.
Product matches a safety notice
High priorityWhat it means: The model, date code or product description may be subject to an official corrective action.
First safe check: Stop use and compare the complete identifying label with the official notice.
Stop condition: Follow only the official refund, repair, replacement or disposal remedy.
Visible damage or deformation
High priorityWhat it means: Cracks, loose joints, exposed wiring or distorted parts can defeat the intended safety design.
First safe check: Isolate the product and photograph the damage without dismantling it.
Stop condition: Do not reuse until the manufacturer confirms a safe remedy.
Part, guard or fastener is missing
Medium priorityWhat it means: The product may be incomplete, incorrectly assembled or affected by a component failure.
First safe check: Stop use and compare the assembly with the official parts and safety information.
Stop condition: Use only manufacturer-approved replacement parts and procedures.
Model or date code cannot be confirmed
Medium priorityWhat it means: A similar-looking product may not be covered by the same instructions or recall.
First safe check: Locate every rating label, serial number and date code before taking action.
Stop condition: Contact the manufacturer or CPSC when identification remains uncertain.
Fire, shock, injury or unexpected movement
High priorityWhat it means: A serious incident or near miss may indicate an immediate product hazard.
First safe check: Move people away, isolate energy only if safe and preserve the product for assessment.
Stop condition: Seek emergency help when needed and report the incident to the manufacturer and authority.
Three additional checks
Use these checks when no error code is displayed.
Product may match a recall
Compare the complete label and follow the official remedy.
Part is loose or damaged
Stop use and contact the manufacturer before repair or replacement.
Model cannot be confirmed
Do not rely on this summary; verify the label with the official source.
Check recalls separately from the manual.
No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.
Search safety notices →This page summarizes an official safety record and corrective measure. Confirm the full model, date code and label before taking action.
Open official safety record →