Compare the complete model, regional suffix and label.
Kärcher
K5 Power Control
Assemble the product, fit the correct cleaning accessory and verify that filters, tanks and safety latches are seated.
English: Product names, model codes, official notices and manufacturer text remain in the authoritative source language. EgoFile interface labels are translated.
What this page contains
- Record type
- Instrukcja producenta
- Authority
- Producent / oficjalne centrum wsparcia
- Verification
- Źródło skatalogowane
- Evidence
- Dokument lub strona wsparcia OEM
- Last source check
- 1 sierpnia 2026
- Indexing policy
- Strona może być indeksowana
Zakres i wariant regionalny należy potwierdzić na tabliczce znamionowej.
Odnośnik do właściciela dokumentuOne product. Everything in one place.
Manufacturer manual. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.
Keep warranty, history and safety alerts together.
Use cited guidance or create a private EgoFile case.
Before first use
- Install the handle, hose, battery or cleaning head.
- Fit clean filters and fill only approved tanks.
- Test the controls on a small suitable surface.
Use the product correctly
- Choose the accessory and power level for the surface.
- Keep airflow paths and rollers free of obstructions.
- Empty dirt or wastewater before the maximum mark.
Important precautions
- Disconnect power before clearing blockages.
- Do not collect hot ash, flammable liquid or sharp debris unless approved.
- Keep water away from non-wet-rated electrical parts.
Keep it working reliably
- Empty containers and rinse washable parts after use.
- Remove hair and fibres from rollers.
- Dry filters completely before refitting.
What the product may be telling you
These are category-level diagnostic paths. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.
No spray, steam or solution flow
Medium priorityWhat it means: A tank, cap, nozzle or supply path may be empty or obstructed.
Safe first check: Refill with the approved liquid and reseat all removable tanks and caps.
Stop condition: Do not open a pressurised or hot system.
Poor water or dirt pickup
Low priorityWhat it means: The recovery tank, filter, seal or nozzle may need cleaning.
Safe first check: Empty the tank and clean user-removable filters and channels.
Stop condition: Stop if liquid reaches a non-wet-rated electrical area.
Pressure or steam drops
High priorityWhat it means: The inlet, nozzle, filter or scale level may restrict output.
Safe first check: Switch off, depressurise or cool as instructed, then clean approved parts.
Stop condition: Never loosen a pressurised fitting; seek service for damaged hoses.
Liquid leaks from the appliance
High priorityWhat it means: A tank, seal, hose or coupling may not be seated or may be damaged.
Safe first check: Stop, disconnect safely and reseat accessible containers and couplings.
Stop condition: Do not restart with a damaged pressure hose, cable or housing.
Three more things to verify
Useful when no error code is visible.
Low suction
Empty the bin and check filters, hose and floor head.
Brush stopped
Remove wrapped fibres after disconnecting power.
Will not charge
Clean contacts and check the dock, adapter and outlet.
Check recalls separately from the manual.
No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.
Search safety notices →This EgoFile page is a practical quick reference, not a replacement for the complete manufacturer document. Confirm the full model, configuration and regional suffix before installation, operation, repair or safety-critical work.
Manufacturer support →