Compare the complete model, regional suffix and label.
Miele
TWD260WP
Set up the appliance on a stable, level surface and confirm that the water, drain and electrical connections match the rating plate.
English: Product names, model codes, official notices and manufacturer text remain in the authoritative source language. EgoFile interface labels are translated.
What this page contains
- Record type
- Instrukcja producenta
- Authority
- Producent / oficjalne centrum wsparcia
- Verification
- Źródło skatalogowane
- Evidence
- Dokument lub strona wsparcia OEM
- Last source check
- 1 sierpnia 2026
- Indexing policy
- Strona może być indeksowana
Zakres i wariant regionalny należy potwierdzić na tabliczce znamionowej.
Odnośnik do właściciela dokumentuOne product. Everything in one place.
Manufacturer manual. Confirm the complete rating-label code before saving a serial number or following variant-specific instructions.
Keep warranty, history and safety alerts together.
Use cited guidance or create a private EgoFile case.
Before first use
- Remove all transport protection and packaging.
- Level the appliance and connect the inlet and drain hoses.
- Run the recommended empty calibration or cleaning cycle.
Use the product correctly
- Sort items by care label, colour and fabric type.
- Load without exceeding the rated capacity.
- Choose a programme and detergent dose suitable for the load.
Important precautions
- Close the water supply before servicing hoses.
- Disconnect power before opening service areas.
- Keep children away from detergent and the open drum.
Keep it working reliably
- Clean the detergent drawer and door seal monthly.
- Inspect the drain filter and hoses regularly.
- Leave the door slightly open after use to dry the interior.
What the product may be telling you
These are category-level diagnostic paths. Error-code numbers differ between brands, markets and revisions, so EgoFile shows a code only after it is confirmed in the exact official manual.
Cycle does not start
Low priorityWhat it means: The door may be open, controls locked or a delayed start may be active.
Safe first check: Close the door firmly, cancel delay start and confirm the child lock symbol is off.
Stop condition: Request service if the lock never engages or the breaker trips.
Appliance does not fill
Medium priorityWhat it means: Water supply, inlet hose or inlet filter may be restricted.
Safe first check: Open the tap fully and inspect the user-accessible hose for a kink.
Stop condition: Stop if a hose is damaged or water appears near electrical parts.
Water remains in the drum
Medium priorityWhat it means: The drain hose, filter or pump path may be obstructed.
Safe first check: Use the emergency drain procedure, then inspect the accessible filter and hose.
Stop condition: Stop if the pump hums repeatedly, leaks or cannot be accessed safely.
Excess vibration or no spin
Medium priorityWhat it means: The load may be unbalanced, the appliance unlevel or transport bolts still fitted.
Safe first check: Redistribute the load and confirm the appliance is stable and level.
Stop condition: Stop if the drum strikes the cabinet or the appliance moves across the floor.
Water leak detected
High priorityWhat it means: A hose, seal, dispenser or internal protection system may be leaking.
Safe first check: Stop the programme, disconnect power if safe and close the water tap.
Stop condition: Do not restart until the leak source has been identified.
Three more things to verify
Useful when no error code is visible.
Appliance does not start
Check the door, power supply and selected delay timer.
Water remains inside
Inspect the drain hose and clean the user-accessible filter.
Excess vibration
Check levelling, load balance and removed transport bolts.
Check recalls separately from the manual.
No exact model match was attached automatically. Search the official safety records by brand, shorter model number or UPC.
Search safety notices →This EgoFile page is a practical quick reference, not a replacement for the complete manufacturer document. Confirm the full model, configuration and regional suffix before installation, operation, repair or safety-critical work.
Manufacturer support →